GP series
Output up to 6kV 1W
Applications:
- Portable, Battery Powered Applications
- Sustaining Ion Pumps
- Vacuum Gauges
- Photomultiplier Tubes
- Spectrometry, Electrostatic Chucks, Lamp Ignition
- Displays, Non-impact Printers
- Electrostatic Field Generation, Avalanche Photodiodes
- Piezo Devices, Electrophoresis
Features:
- Low Power Consumption
- Small Case Size
- Light Weight
- Short Circuit Protection
- Low EMI/RFI
- Input/Output Isolation (Floating Output)
- Center Tap Option
- Low Cost / High Performance
- MTBF: >2.31 million hrs per Bellcore TR-332
The GP Series is a line of miniature, DC to HV DC converters providing 0.1kVDC to 6kVDC, positive or negative, in a compact PCB mount package.
This line features low power consumption, making it ideal for portable, battery powered applications.
The isolated output is proportional to the input, and is linear from approximately 0.7 V in.
A low noise quasi-sinewave oscillator and shielded transformer provide clean, reliable DC to HV DC conversion with low EMI and RFI. The isolated output allows for user selectable output polarity.
No minimum load is required.
| Model | Output *3 Voltage | Output *5 Current | Input Voltage | Input *2 Current (No Load) | Input *2 Current (Full Load) | Ripple |
|---|---|---|---|---|---|---|
| GP01 | 0 - 0.1kV | 10mA | 0 - 12V | <45mA | <150mA | <0.75% |
| GP02 | 0 - 0.2kV | 5mA | 0 - 12V | <45mA | <150mA | <1.75% |
| GP03 | 0 - 0.3kV | 3mA | 0 - 12V | <45mA | <125mA | <0.50% |
| GP05 | 0 - 0.5kV | 2mA | 0 - 12V | <15mA | <125mA | <0.50% |
| GP06 | 0 - 0.6kV | 1.66mA | 0 - 12V | <15mA | <125mA | <0.50% |
| GP08 | 0 - 0.8kV | 1.25mA | 0 - 12V | <25mA | <125mA | <0.75% |
| GP10 | 0 - 1kV | 1mA | 0 - 12V | <15mA | <125mA | <0.75% |
| GP12 | 0 - 1.2kV | 840μA | 0 - 12V | <15mA | <125mA | <0.75% |
| GP15 | 0 - 1.5kV | 660μA | 0 - 12V | <20mA | <125mA | <0.75% |
| GP20 | 0 - 2kV | 500μA | 0 - 12V | <30mA | <130mA | <0.75% |
| GP25 | 0 - 2.5kV | 400μA | 0 - 12V | <30mA | <130mA | <1.00% |
| GP30 | 0 - 3kV | 340μA | 0 - 12V | <40mA | <130mA | <1.00% |
| GP40 *1 | 0 - 4kV | 250μA | 0 - 12V | <50mA | <130mA | <1.00% |
| GP50 *1 | 0 - 5kV | 200μA | 0 - 12V | <70mA | <150mA | <1.50% |
| GP60 *1 | 0 - 6kV | 166μA | 0 - 12V | <85mA | <175mA | <1.00% |
*1 Caution: Models GP40, GP50 & GP60 do not have internal bleeder resistors on the output.
Provisions must be made externally to discharge the output capacitors if this feature is desired.
*2 At maximum rated output voltage.
*3 Output Voltage is load dependent. Under light or no load conditions, reduce input
voltage so maximum rated output voltage is not exceeded.
*4 Specifications after 30 minutes warm-up, full load, at 25°C unless otherwise noted.
*5 The rated output current is available at full output voltage and must be derated
proportionally as the input voltage decreases.
For example: a 500V, 1.5W unit, rated at 3mA at 500V will provide 1.5mA at 250V out.
| ||||||||||||||||||||||||||||||||||||||
Disclaimer
Bei den hier angegebenen Informationen handelt es sich um technische Daten, nicht um zugesicherte Produkteigenschaften. Sie wurden sorgfältig geprüft; für mögliche Fehler wird jedoch keine Gewähr übernommen. Der Anwender muss durch geeignete Tests sicherstellen, dass die Produkte für seine Anwendung hinsichtlich Sicherheit und technischer Verwendung geeignet sind. hivolt.de GmbH & Co. KG haftet nicht für mögliche Folgen, die sich aus der Verwendung der angebotenen Produkte ergeben.
Sicherheitshinweis
Installation und Inspektion von sowie der Umgang mit Hochspannung erzeugenden und übertragenden Komponenten dürfen nur von entsprechend qualifiziertem und geschultem Personal vorgenommen werden. Die einschlägigen Vorschriften und Sicherheitsrichtlinien sind stets einzuhalten. Unsachgemäßer Umgang mit Hochspannung kann Tod, schwere Personenschäden und Sachschäden verursachen!