HA61G-6B10

The HA61G-6B10 is a fast precision high voltage amplifier with integrated signal generator in a 19" rack mountable case. This single channel amplifier provides output voltages of -6000V to +6000V at ±10mA (static) and 20mA_P (dynamic). The power bandwidth is 5kHz. The amplifier features high precision, high stability and very low noise. It is suitable to drive capacitive and resistive-capacitive loads. The output is stable with any capacitive load and also stable at no load conditions. It can easily drive loads like EAP actuators, electrorheological fluid elements, electrostatic deflection electrodes and many other loads. A differential ±10V amplifier input prevents any ground loops and provides excellent noise suppression. The maximum output current can be limited to programmable values and programmable behavior. Internal high voltage sources feed the output stage. The output stage is protected against overload, short circuit, over temperature and high voltage arcing. The amplifier output is made available via a high voltage connector on the rear. A safety interlock circuit is provided to integrate the unit into an emergency shutdown circuit.
A command interface is available via USB and Ethernet interfaces to control the amplifier. Monitor values of output voltage, output current as well as internal operational parameters can be read.
An implemented DDS/ARB signal generator is provided to generate standard waveforms like sinewave, trapezoid, squarewave, pulse, sawtooth and noise as well as fully arbitrary waveshapes. Parameters are controllable via the command interface. The internal waveform generator can be synchronized to other generators or signal sources.

• High Voltage Output ±6000V / ±10mA
• Programmable Current Limit
• Integrated DDS/ARB Signal Generator
• High Precision, High Stability
• Low Noise
• High Speed
• Inhibit Input
• V/I Monitor Outputs
• Interlock Input and HV OFF Button