F series
Output up to 8kV 10W
The F Series is a broad line of small, versatile, DC to HV DC converters that provide up to 8,000 VDC (±) at 10 W continuous output power. The output is proportional to the input voltage, and features a low 0.7 typical turn-on voltage. Eighteen models are available covering the range of 0 to 200 V through 0 to 8,000 V, positive or negative. These modules exhibit very low EMI/RFI, noise and ripple by means of a quasi-sinewave oscillator, a fully enclosed transformer. input and output filtering, and a five sided metal enclosure. The isolated output offers a lot of possibilities in configuring for negative or positive output polarity.
Options include two mounting holes and an output center-tap option which, when grounded, provides both positive and negative outputs from one compact, low cost module.
Applications:
- Capacitor Charging
- Spectometry
- Piezo Devices
- Lamp Ignition
- Lamp Drive
- Q Switches
- Ion Pumps
- Electro-Static Field Generation
- Grid Bias
- Electrophoresis
- Lasers
Features:
- Low Ripple
- Very Low EMI/RFI
- PCB Mountable
- Compact Package
- Input/Output Isolation (Floating Output)
- Center Tap Option
- Convection Cooling / No Derating Required
- Input/Output Filtering
- Short Circuit Protection
Options:
Mounting Holes, add H to model number
(Models F70-F80 come standard with holes)
Output Center Tap, add CT to model number
| Model | Input Voltage [VDC] | Output Voltage *2 [VDC] | Max. Output Current *4 [mA] | Ripple p-p |
|---|---|---|---|---|
| F02 | 0 - 12 | 0 - ±200 | 50 | < 1.0% |
| F03 | 0 - 12 | 0 - ±300 | 33.3 | < 1.0% |
| F04 | 0 - 12 | 0 - ±400 | 25 | < 1.0% |
| F05 | 0 - 12 | 0 - ±500 | 20 | < 0.1% |
| F06 | 0 - 12 | 0 - ±600 | 16 | < 0.1% |
| F08 | 0 - 12 | 0 - ±800 | 12.5 | < 0.1% |
| F10 | 0 - 12 | 0 - ±1,000 | 10 | < 0.1% |
| F12 | 0 - 12 | 0 - ±1,200 | 8.3 | < 0.1% |
| F15 | 0 - 12 | 0 - ±1,500 | 6.6 | < 0.1% |
| F20 | 0 - 12 | 0 - ±2,000 | 5 | < 1.0% |
| F30 | 0 - 15 | 0 - ±3,000 | 3.3 | < 1.0% |
| F40 | 0 - 15 | 0 - ±4,000 | 2.5 | < 1.0% |
| F50 | 0 - 15 | 0 - ±5,000 | 2 | < 1.0% |
| F60 | 0 - 15 | 0 - ±6,000 | 1.66 | < 1.0% |
| F70 | 0 - 15 | 0 - ±7,000 | 1.5 | < 2.5% |
| F80 | 0 - 15 | 0 - ±8,000 | 1.25 | < 2.5% |
*1 - At maximum rated output voltage
*2 - Output voltage is load dependent. Under light or no-load conditions, reduce the input voltage so maximum rated output voltage is not exceeded.
*3 - Specifications after 30 minutes warm-up, full load, at 25°C unless otherwise noted.
*4 - The rated output current is available at full output voltage and must be derated proportionally as the input voltage decreases. For example: a 500V, 1.5W unit, rated at 3mA at 500V will provide 1.5mA at 250V out.
Electrical Specifications*3:
- Typical turn-on voltage: 0.7 V
- Input current (no load)*1: <500 mA
- Input current (full load)*1: <1.5 A
- Isolation (F02-F60): 3,500 V + VOUT
- Isolation (F70-F80): 500 V + VOUT
- Operating temp: -10°C to +70°C
Physical Characteristics:
- F02-F60: 2.8" x 1.7" x 0.85"
(71 x 43 x 21 mm3) - F70-F80: 2.8" x 1.7" x 0.95"
(71 x 43 x 24 mm3) - Weight: <5 ounces (142 g)
- Packaging: Epoxy Encapsulated
- Case material: Black Anodized Aluminium
Disclaimer
Bei den hier angegebenen Informationen handelt es sich um technische Daten, nicht um zugesicherte Produkteigenschaften. Sie wurden sorgfältig geprüft; für mögliche Fehler wird jedoch keine Gewähr übernommen. Der Anwender muss durch geeignete Tests sicherstellen, dass die Produkte für seine Anwendung hinsichtlich Sicherheit und technischer Verwendung geeignet sind. hivolt.de GmbH & Co. KG haftet nicht für mögliche Folgen, die sich aus der Verwendung der angebotenen Produkte ergeben.
Sicherheitshinweis
Installation und Inspektion von sowie der Umgang mit Hochspannung erzeugenden und übertragenden Komponenten dürfen nur von entsprechend qualifiziertem und geschultem Personal vorgenommen werden. Die einschlägigen Vorschriften und Sicherheitsrichtlinien sind stets einzuhalten. Unsachgemäßer Umgang mit Hochspannung kann Tod, schwere Personenschäden und Sachschäden verursachen!