HA61U-4B10
±4kV, ±10mA / ±20mAp, Precision Programmable High Voltage Amplifier
The HA61U-4B10 is a fast precision high voltage amplifier with integrated signal generator in a 19" rack mountable case. This single channel amplifier provides output voltages of -4000V to +4000V at ±10mA (static) and 20mAP (dynamic). The dynamic output current is available for signal frequencies down to 1Hz. The amplifier's power bandwidth is 7kHz The amplifier features high precision, high stability and very low noise. It is suitable to drive capacitive and resistive-capacitive loads. The output is stable with any capacitive load and also stable at no load conditions. It can easily drive loads like EAP actuators, electrorheological fluid elements, electrostatic deflection electrodes and many other loads. A differential ±10V amplifier input prevents any ground loops and provides excellent noise suppression. The maximum output current can be limited to programmable values and programmable behavior. Internal high voltage sources feed the output stage. The output stage is protected against overload, short circuit, over temperature and high voltage arcing. The amplifier output is made available via a SHV high voltage connector at the rear. A safety interlock circuit is provided to integrate the unit into an emergency shutdown circuit.
A command interface is available via USB to control the amplifier and set static output voltage and current limit. Monitor values of output voltage, output current as well as internal operational parameters can be read.
- High Voltage Output ±4000V / ±10mA
- High Precision, High Stability
- Low Noise
- Programmable Current Limit
- High Speed
- Inhibit Input
- V/I Monitor Outputs
- Interlock Input and HV OFF Button
Disclaimer
Bei den hier angegebenen Informationen handelt es sich um technische Daten, nicht um zugesicherte Produkteigenschaften. Sie wurden sorgfältig geprüft; für mögliche Fehler wird jedoch keine Gewähr übernommen. Der Anwender muss durch geeignete Tests sicherstellen, dass die Produkte für seine Anwendung hinsichtlich Sicherheit und technischer Verwendung geeignet sind. hivolt.de GmbH & Co. KG haftet nicht für mögliche Folgen, die sich aus der Verwendung der angebotenen Produkte ergeben.
Sicherheitshinweis
Installation und Inspektion von sowie der Umgang mit Hochspannung erzeugenden und übertragenden Komponenten dürfen nur von entsprechend qualifiziertem und geschultem Personal vorgenommen werden. Die einschlägigen Vorschriften und Sicherheitsrichtlinien sind stets einzuhalten. Unsachgemäßer Umgang mit Hochspannung kann Tod, schwere Personenschäden und Sachschäden verursachen!