Zum Inhalt springen

G series

Output up to 6kV 1.5W

G_Series.pdf
g_3.jpg

Applications:

  • Non-impact Printers, Sustaining Ion Pumps
  • Piezo Devices, Vacuum Gauges
  • Photomultiplier Tubes
  • Spectrometry, Electrostatic Chucks
  • Lamp Ignition and Drive, Displays

Features:

  • Low Ripple, Miniature Case Size
  • Low EMI/RFI Sinewave Oscillator
  • Proportional Input/Output
  • User-Selectable Output Polarity
  • Short Circuit Protection
  • Low Cost / High Performance
  • Input/Output Isolation (Floating Output)
  • Center Tap Option

A line of miniature, versatile component level building blocks with low ripple and low EMI/RFI.
The output voltage is directly proportional to the input voltage.
The isolated output allows for user selectable output polarity. An optional output center tap provides, when grounded, both positive and negative outputs.
Typical applications include: non-impact printers, sustaining ion pumps, piezo devices, vacuum, photomultiplier tubes, spectrometry etc.

Model Output *3
Voltage		 Output *5
Current		 Input Voltage Input *2
Current
(No Load)		 Input *2
Current
(Full Load)		 Ripple
G01 0 - 0.1kV 15mA 0 - 12V <100mA <250mA <1.75%
G02 0 - 0.2kV 7.5mA 0 - 12V <100mA <250mA <0.75%
G03 0 - 0.3kV 5mA 0 - 12V <100mA <250mA <0.75%
G05 0 - 0.5kV 3mA 0 - 12V <100mA <250mA <0.02%
G06 0 - 0.6kV 2.5mA 0 - 12V <100mA <250mA <0.1%
G10 0 - 1kV 1.5mA 0 - 12V <100mA <250mA <0.1%
G12 0 - 1.2kV 1.25mA 0 - 12V <150mA <275mA <0.1%
G15 0 - 1.5kV 1mA 0 - 12V <125mA <275mA <0.5%
G20 0 - 2kV 0.75mA 0 - 12V <165mA <275mA <0.5%
G25 0 - 2.5kV 0.6mA 0 - 12V <125mA <275mA <1.0%
G30 0 - 3kV 0.5mA 0 - 12V <125mA <300mA <2.0%
G40 *1 0 - 4kV 0.37mA 0 - 12V <125mA <300mA <1.0%
G50 *1 0 - 5kV 0.3mA 0 - 12V <125mA <300mA <2.0%
G60 *1 0 - 6kV 0.25mA 0 - 12V <125mA <300mA <2.0%
(col7)
Photomultiplier Model
GPMT 0 - 1.25kV 0.35mA 0 - 12V <35mA <75mA 0.05%

*1 Caution: Models G40, G50 & G60 do not have internal bleeder resistors on the output.
      Provisions must be made externally to discharge the output capacitors if this feature is desired.
*2 At maximum rated output voltage.
*3 Output Voltage is load dependent. Under light or no load conditions, reduce input
      voltage so maximum rated output voltage is not exceeded.
*4 Specifications after 30 minutes warm-up, full load, at 25°C unless otherwise noted.
*5 The rated output current is available at full output voltage and must be derated
      proportionally as the input voltage decreases.
      For example: a 500V, 1.5W unit, rated at 3mA at 500V will provide 1.5mA at 250V out.

 

Specifications:

Input Voltage:See table
Typical Turn-On Voltage:0.7 V
Output Voltage:See table
Output Current:See table
Ripple:See table
Load Regulation:10% (No Load to Full Load)
Isolation:3.5kV (Input to Output)
Operating Temp:-10°C to +60°C
Weight:43 g approx.
Packaging:Fully Encapsulated
Case Material:Glass-filled Epoxy
Pins:0.79mm Diameter,
5.1mm Long
 		 

Options:

CTOutput Center Tap (add CT to model number, e.g. G10CT)
-RRoHS compliant
Epoxy:A.  Low Outgassing (NASA approved per ASTM E-959-93)
B.  UL 94 V0 flammability rating
Extended Operating & Storage Temperature
Low Power Consumption: See GP Series

 
Accessories:

ABExternal Mounting Box
 
Disclaimer

Bei den hier angegebenen Informationen handelt es sich um technische Daten, nicht um zugesicherte Produkteigenschaften. Sie wurden sorgfältig geprüft; für mögliche Fehler wird jedoch keine Gewähr übernommen. Der Anwender muss durch geeignete Tests sicherstellen, dass die Produkte für seine Anwendung hinsichtlich Sicherheit und technischer Verwendung geeignet sind. hivolt.de GmbH & Co. KG haftet nicht für mögliche Folgen, die sich aus der Verwendung der angebotenen Produkte ergeben.

Sicherheitshinweis

Installation und Inspektion von sowie der Umgang mit Hochspannung erzeugenden und übertragenden Komponenten dürfen nur von entsprechend qualifiziertem und geschultem Personal vorgenommen werden. Die einschlägigen Vorschriften und Sicherheitsrichtlinien sind stets einzuhalten. Unsachgemäßer Umgang mit Hochspannung kann Tod, schwere Personenschäden und Sachschäden verursachen!