High Voltage Divider
For laboratory measurement, system test point, or control loop feedback, this precision, low drift, high voltage divider provides a low voltage output from voltages as high as 25,000VDC.
The 1000:1 divider is internally compensated for your digital multimeter’s 10MΩ input impedance. Ratio tolerance is 1% and temperature drift is a low 50ppm.
The V1G divider provides a low cost solution to high voltage measurement without the expense and bulk of a probe, and without the danger of an exposed resistor. Using high voltage encapsulation techniques, the divider is protected from the problems that occur when high voltage is exposed to dust and moisture.
PCB pins and mounting holes make this module ideal for PCB mounting. The high voltage connection is made through a 30 kV silicone wire.
- Voltage Range: 1kVDC - 25kVDC
- Ratio: 1000:1 into 10MΩ
- Ratio Tolerance: <1%
- Total Resistance: 1000MΩ
- Dimensions (LxWxH): 76.2x25.4x12.7mm³
- Weight: 28.3g approx.
Disclaimer
The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.
Safety Advice
Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!