ZUP series
ZERO-UP 200W/400W/800W High Power Programmable Power Supplies
- Constant Voltage/Constant Current
- Built-in RS232 & RS485 Interface
- An embedded Microprocessor controller
- Digital Encoder Knob
- Software Calibration
- Last Setting Memory
- Parallel Operation (Master/Slave) Active Current Sharing
- External Voltage or Resistance Programming
- Active Power Factor Correction: 99%
- 85-265VAC Universal Input Voltage
- 19" Rack Mounted ATE and OEM
- Worldwide Safety Agency Approvals
- CE Mark for LVD and EMC Regulation
The laboratory power supplies offer an adjustable and well stabilised output with very low ripple at a wide input range. As laboratory stand alone instrument or inserted in a 19" rack the output connectors are at the rear side or at the front. Manual operation and display of current and voltage at the front and interface RS232 or an analog input are standard for remote control.
Model Overview 200W
| ZUP | 6-33 | 10-20 | 20-10 | 36-6 | 60-3.5 | 80-2.5 | 120-1.8 |
|---|---|---|---|---|---|---|---|
| UOUT [VDC] | 0-6 | 0-10 | 0-20 | 0-36 | 0-60 | 0-80 | 0-120 |
| IOUT [ADC] | 0-33 | 0-20 | 0-10 | 0-6 | 0-3.5 | 0-2.5 | 0-1.8 |
Model Overview 400W
| ZUP | 6-66 | 10-40 | 20-20 | 36-12 | 60-7 | 80-5 | 120-3.6 |
|---|---|---|---|---|---|---|---|
| UOUT [VDC] | 0-6 | 0-10 | 0-20 | 0-36 | 0-60 | 0-80 | 0-120 |
| IOUT [ADC] | 0-66 | 0-40 | 0-20 | 0-12 | 0-7 | 0-5 | 0-3.6 |
Model Overview 800W
| ZUP | 6-132 | 10-80 | 20-40 | 36-24 | 60-14 |
|---|---|---|---|---|---|
| UOUT [VDC] | 0-6 | 0-10 | 0-20 | 0-36 | 0-60 |
| IOUT [ADC] | 0-132 | 0-80 | 0-40 | 0-24 | 0-14 |
Disclaimer
The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.
Safety Advice
Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!