GEN2400 series
Applications:
The GEN2400 units have been designed to meet the demands of a wide variety of applications. System designers will appreciate new, standard, remote programming features such as global commands. Also, new high-speed status monitoring is available for the RS-485 bus.
- Test systems using the IEEE-488 bus may achieve significant cost savings by incorporating the Optional IEEE Multi-Drop Interface for a Master and up to 30 RS-485 Multi-Drop Slaves.
- Higher power systems can be configured with up to four 2.4kW modules. Each module is 1U with zero space between them (zero stack).
- OEM Designers have a wide variety of inputs and outputs from which to select depending on application and location.
Features:
- High Power Density 2.4kW in 1U
- Wide Range of popular worldwide AC inputs, 1ø (230VAC) & 3ø (208VAC)
- Active Power Factor Correction (Single-Phase & Three-Phase AC Input)
- Output Voltage up to 600V, Current up to 300A
- Built-in RS-232/RS-485 Interface Standard
- Global Commands for Serial RS-232/RS-485 Interface
- Auto-Re-Start / Safe-Start: user selectable
- Last-Setting Memory
- High Resolution 16 bit ADCs & DACs
- Low Ripple & Noise
Flexible configuration is provided by the complete Genesys™ Family: 1U 750W Half-Rack, 1U 750W and 1500W. Full-Rack, 2U 3.3kW & 5kW. All are identical in Front Panel, Rear Panel Analog, and all Digital Interface Commands. A wide variety of outputs allows testing of many different devices.
Model Overview
| GEN | 8-300 | 10-240 | 16-150 | 20-120 | 30-80 | 40-60 | 60-40 | 80-30 | 100-24 | 150-16 | 300-8 | 600-4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VOUT[VDC] | 8 | 10 | 16 | 20 | 30 | 40 | 60 | 80 | 100 | 150 | 300 | 600 |
| IOUT[ADC] | 300 | 240 | 150 | 120 | 80 | 60 | 40 | 30 | 24 | 16 | 8 | 4 |
| POUT[W] | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 |
Disclaimer
The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.
Safety Advice
Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!