HA61U-6B20
±6kV, ±20mA / ±40mAp, Precision Programmable High Voltage Amplifier
The HA61U-6B20 is a fast precision high voltage amplifier in a 19" rack mountable case. This single channel amplifier provides output voltages of -6000V to +6000V at ±20mA (static) and 40mAP (dynamic). The dynamic output current is available for signal frequencies down to 10Hz. The amplifier's power bandwidth is 8kHz. The amplifier features high precision, high stability and very low noise. It is suitable to drive capacitive and resistive-capacitive loads. The output is stable with any capacitive load and also stable at no load conditions. It can easily drive loads like EAP actuators, electrorheological fluid elements, electrostatic deflection electrodes and many other loads. A differential ±10V amplifier input prevents any ground loops and provides excellent noise suppression. The maximum output current can be limited to programmable values and programmable behavior. Internal high voltage sources feed the output stage. The output stage is protected against overload, short circuit, over temperature and high voltage arcing. The amplifier output is made available via a high voltage connector at the rear. A safety interlock circuit is provided to integrate the unit into an emergency shutdown circuit.
A command interface is available via USB to control the amplifier and set static output voltage and current limit. Monitor values of output voltage, output current as well as internal operational parameters can be read.
- High Voltage Output ±6000V / ±20mA
- High Precision, High Stability
- Low Noise
- Programmable Current Limit
- High Speed
- Inhibit Input
- V/I Monitor Outputs
- Interlock Input and HV OFF Button
Disclaimer
The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.
Safety Advice
Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!