HA1.25B2-S
±1250V, ±2mA, Precision High Voltage Amplifier
The HA1.25B2-S is a high precision high voltage amplifier 3U / 6HP / 220mm plug-in card. The amplifier output is available via an SHV connector located on the front panel. Signal gain is 125, the input voltage range is ±10V. The amplifier features high precision, very high stability, high speed as well as very low ripple and noise. The output voltage can be controlled by means of a differential setpoint input . The amplifier is equipped with a voltage and current monitor and a TTL compatible INHIBIT input. A safety interlock circuit is provided to integrate the unit into an emergency shutdown circuit.
- High Voltage Output ±1250V / ±2mA
- High Precision, High Stability
- Low Noise
- High Speed
- Inhibit Input
- V/I Monitor Outputs
- Local High Voltage Generation
- Interlock Input
Disclaimer
The information given here is technical data, not assured product characteristics. It has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. The user has to ensure by adequate tests that the product is suitable for his application regarding safety and technical aspects.
hivolt.de GmbH & Co. KG does not assume any liability arising out of the application or use of any product described.
Safety Advice
Design, installation and inspection of machinery and devices carrying high voltage require accordingly trained and qualified personnel. Appropriate safety rules and directives must be complied with.
Improper handling of high voltage can mean severe injuries or death and may cause serious collateral damage!